A Big Jar of Love for my Mum

Back in November, my Mum reached a milestone birthday which warranted an extra special card.  For some time, I’ve been meaning to try out an easel card and also to create a floral wreath using the Jar of Love so I decided to combine the two.

For this project, I used:

Stampin’ Up! Jar of Love stamp set

SU! Everyday Jars framelits

SU! Large Letters Framelits & Letters For You stamps

SU! Number of Years and Large Numbers framelits (sadly retired)

11½” x 5¾” Blackberry Bliss card scored at 5¾” and again at 2⅞” on one half

5¾” x 5¾” Blackberry Bliss card

5¼” x 5¼” Whisper White card

5½” x 5½” and 5” x 2” pieces of Always Artichoke (retired but I love it!)

A couple of pieces of Smoky Slate card

Silver embossing powder

SU! Inks in Blackberry Bliss, Blushing Bride, Old Olive, Garden Green

A 5½” x 2⅝” strip of DSP (I used one of the Frosted Florals pack)

A scrap of silver glimmer paper

Layered Leaves Embossing folder

I started off by stamping ‘MUM’ in Blackberry Bliss ink and cutting the letters out with the matching framelits.  For the backgrounds to the letters and numbers, I cut out a couple of scalloped ovals from Smoky Slate card and ran them through the Bigshot in the Layered Leaves embossing folder to give some texture.

Next, I set to work stamping the flowers, leaves and bow for the wreath.  I used Blackberry Bliss and Blushing Bride for the flowers using 2nd generation stamping to get some colour variation.  The leaves were stamped in Old Olive and Garden Green.  All these were cut out using the Everyday Jars framelits.  I also cut out some small hearts from silver glimmer paper.

I drew around the scalloped oval onto the white card to give me a guide for stamping the sprigs of small leaves for the background layer of foliage. I stamped these using Old Olive and Garden Green inks in a random pattern around the oval.

The MUM letters were stuck onto the grey oval using dimensionals and then the oval was adhered to the white piece over the stamped leaf sprigs.  I played around with the flowers, leaves and hearts to get the placement right and then glued them on with a mix of glue and dimensionals, tucking some under the oval and some under the letters to add interest.  The white card was then adhered to the Always Artichoke panel and then onto the Blackberry Bliss panel.  This forms the card front.

To make the front of the card, apply strong adhesive tape to the outer half of the scored panel only.

Then stick the card front onto this adhesive.

To make the ‘stop’ for the easel, I layered up the strip of always artichoke with the DSP and the grey oval, added a stamped and heat embossed “Happy TH Birthday” strip and then stuck the numbers cut from silver glimmer paper on top using dimensionals and then stuck the whole panel on using dimensionals to raise it up to form the stopping element.

I really like the sentiment in the number set so on the strip of Always Artichoke, I stamped that and ‘70’ in Versamark and silver embossing powder and heat set it.  I stuck this onto the reverse side of the easel.

I found some great little stickers on Pinterest to stick to the back of the card to show how to display an easel card – handy for the uninitiated!

https://pin.it/klsim4jtb2ft5n

I was really happy with the finished card but more importantly, my Mum loved it.

 

 

 

© 2018 Stampin’ Up!

 

 

Dragonflies & Dandelions Card

After spending (erm…wasting!) many hundreds of £££ buying stamp sets that I liked but didn’t have any ideas for, I now only buy stamp sets that I can immediately think of 3 projects or cards that I could use them for. This was the case with Stampin’ Up!’s Dragonfly Dreams and more recently Dandelion Wishes, the latter being one of my all-time favourite sets.  I thought that the two sets would complement each other well  and decided to use the dandelion stamp to make my version of DSP (Designer Series Paper).  Here’s the card.

I wanted a monochrome look so stamped in grey ink but you could use any colours you fancy.  Here’s another I made using light turquoise ink and a scrap of ice blue glitter card I found in my large box of card offcuts.  You can really see the wing detail of the stamped image.

This is another different look using Crushed Curry and Pumpkin Pie inks together with gold glimmer paper.

If you’d like to watch my YouTube video tutorial on making this card, please click this link

https://youtu.be/DUKUmoHxfiE

To make this card, I used:

  • Stampin’ Up! Dragonfly Dreams stamps and Dragonfly thinlits
  • Stampin’ Up! Dandelion Wishes stamps
  • 11.5″ x 4 1/8″ white card base, unscored (you will score it later)
  • 5.5″ x 3 7/8″ card lining piece, I used grey
  • 3.5″ x 3″ pieces of silver glitter card and grey card for the dragonfly cut outs
  • Scraps of white/grey for the sentiment
  • Co-ordinating ink pad
Materials needed
  1. Stamp the dragonfly showing the wing details onto the small grey piece of card and then cut out using the solid framelit.
  2. Cut out the detailed dragonfly framelit using the glitter card.
  3. Stick the glitter dragonfly onto the grey stamped dragonfly image, only adhering the body and tail.  Gently bend the glitter wings up a little to give the 3D effect.

    3D glitter dragonfly (left) and inlaid dragonfly (instructions later)
  4. Measure 5.75″ along your card base and put a couple of tiny pencil marks.  Stick a post-it note along these marks, positioned to the left of the marks.
  5. Stamp your background image using the Dandelion Wishes stamps.  Less is more –  you don’t want to entirely cover the card.  Ensure you stamp off the edges too.  Whilst you’ve got your ink out, add a little stamped detail to your card inner and the envelope and stamp your sentiment on the scrap of white.
  6. Remove the mask, erase the pencil marks then score the base at 5.75″ and fold in half.
  7. Adhere the liner to the inside of the card.
  8. Cut out your greeting and add a backing if you want.  You can flag the ends, add a mat, add a small offset mat (which I did) – the choice is up to you!  It’s one of the ways you can make the card your own.  I added a grey mat the same size as my sentiment, positioned offset slightly above and left of the sentiment. I thought it looked a bit bare so added a couple of rhinestones – well who doesn’t like a bit of bling?!
  9. Add some foam dimensionals behind the sentiment and the dragonfly body and head and add to your card front.

And you’re all finished!

Try changing things up by trying out different colourways, changing the sentiment and/or changing the position of the elements.  In this one, I used the large detailed dragonfly thinlit and flagged the sentiment banner.

 

Inlaid Dragonfly Directions

If you wanted to use the glitter cut outs from your glitter dragonfly wings to make another card topper, the inlaid dragonfly shown above, here’s what you do.

  1. Stick a piece of double sided adhesive sheet onto another piece of grey 3.5″ x 3″ card stock and cut out the solid dragonfly and also cut a detailed dragonfly out of grey card. 
  2. Remove the adhesive backing paper and adhere the detailed dragonfly  to it.  The adhesive is quite unforgiving so try lining up the body and head first and the wings should follow suit.  (You can always trim off any adhesive backing showing on the front if necessary.) This will leave the holes in the wings with a sticky surface.
  3. Using your silver glitter dragonfly  and trying to keep all the pieces together, lay the  glitter dragonfly directly on top of the one you just made and using tweezers, a cocktail stick, pokey tool or the like, push the cut out pieces through into the adhesive lined holes underneath.  You will have to press quite firmly.
  4. Carefully remove the glitter dragonfly, capturing any cut-outs that haven’t stuck and relocate them.
  5. Press the glitter inserts firmly onto the dragonfly base to ensure they’re properly adhered.

Lo and behold! 2 dragonfly card toppers for your projects!

 

Another project

You can also make this into a cute picture using a shadow box frame.  I used a 10cm x 10cm white shadow box for this.

Thanks to Liz Yuille of Old Stables Crafts for the inspiration for the inlaid dragonfly.  https://oldstablescrafts.co.uk/

Images ©Stampin’ Up!